Clothing Maintenance Tips

2011-01-11

mechanical equipment safety operation procedures (a) lathe safety operation procedures

1. Before driving must wear clothes, buttoned clothing, sleeve, long hair, long hair dish who must be within the working cap, high-speed cutting, must wear a safety glasses.

2. Before operation tools, workpiece, should be placed in order to remove any hinder equipment operation and operation activities of the debris.

3. Raid before driving machine handles transmission part and whether fine and sensitive, again with low-speed idling 2 ~ 5 minutes, observation run circumstance, fine and correct after the homework.

4. Great work pieces, installed card must pad board head card, in case the workpiece off damaged equipment or workpiece; Workpiece, don’t suffer from semi-manipulator with hammer or other things slams, lest damage chuck.

5. Lathe in operation, wearing gloves with operation and son of workpiece rag cotton oil, wipe dirt, scrap iron, don’t suffer from every bed transfer items.

6. Filing, polishing, charging lubricant, coolant, must pay attention to the physique parts clothes, cuffs safety.

7. Whoever the garden below mm, not by hand directly hole stretching into sanding, must use sticks to cover on emery cloth burnish.

8. Replace tools, chuck would you beauty, unloading workpieces and measure size, must stop, and will wave to appropriate location throats. Don’t suffer from hand brake.

9. Turning, the work-piece must be stuck fast, die-casting not too big, cutting amount is too deep, prevent fly crumbs cuts.

10. Grinding workpiece, must grasp the direction and dynamics, prevent injury and the fingers and physique.

11. Tapping or set of silk, must use the specialized tools, to prohibit a walking tapping frame, skill drive.

12. Cut; when, should keep enough headroom, remove hit broken, lest cut off hurt or damage when machine tools. Small material cut, must not use fielder.

13. Lathe operation, forbidden to winnow them make speed handle, shifting must stop for, make its gear meshing, and often note purely a rainy circumstances, such as running, to stop immediately check repair.

14. When operating, must concentrate on, don’t suffer from do and machining matters don’t suffer from from the lathe.

15. Don’t suffer from allowing others to operate lathe without authorization.

16. Homework finished, should stop equipment, will handle place to proper position, cut off power supply.

17. Before coming off work, must clean cutting tools, tools, workpiece and put them in order, cleaning out scraps, sundry, do the cleaning machine and peripheral.

18. Often link machine ministries qing Indian handicrafts sanctify themselves, accessories and lubrication moderate complete.

(2) milling machine safety operation procedures

1.

2).

3. Raid before driving machine handles transmission part and whether fine and sensitive, again with low-speed idling 3 ~ 5 minutes, observation run circumstance, fine and correct after the homework.

4. Milling and processing dimensions are not suffering from across the milling machine processing abilities.

5. Dividing head of worm and worm connection between it’s okay, spanning regulations should be adjusted to the appropriate clearance.

6. Unloading workpieces, should be vigilant the light put off, in case the workpiece damage equipment or workpiece; Workpiece, not after suffering semi-manipulator with hammer or other things knock machine, cutter, jig, etc, in order to avoid damage.

7. Milling first to use manual or points to move against knife cut and correct, again will try from tool 15 ~ 20mm workpiece, the composition, measuring tools of good workbench, driving again after optimizing, forbidden to drive.

8. Milling machine in operation, prohibits the use of rag.

9. Milling, must pay attention to the physique parts clothes, cuffs safety.

10. Replace cutter, jig, unloading workpieces, measurement size, cleaning the scrap iron, must stop, and will wave to appropriate location throats.

11. Fuck the author often should limit switches of each block raid iron screw loose, pay attention to whether the voice of machine tool.

12. Operation.

13. Disassembling knives, mesa must be made by hand, banned mat board to Joe the knife dish;

14. Knives, use installed flat board nut, pull to note wrench open appropriate, forcibly not vastly, prevent slipping.

15. Loading and unloading, must use cotton knives, loading and unloading the blade wrapped after winning horse linchpin of cotton.

16. Use the milling cutter, cutter, workpiece’s head with what he does, not to work, a head single-blade knives on the knife dish metallutgy should not be less than six and should be uniform. Optimizing

17. Workbench lift or mobile before, should first will clamping institutions and note its loose trend and signal indication is consistent. Table and let rise lung Taiwan not synchronized motion.

18.

(3) drilling safety operation procedures

1.

2).

3. Should according to workpiece hardness and aperture adjustment drill RPM, hard material and large diameter drilling should choose low penetration rate; But don’t suffer from in electricity adjusts the speed.

4. Before driving transmission part and raid on drilling handles whether fine and sensitive, adjust the speed with the hand first dish, should try turn, guarantee dynamic meshing gears, again with pure after low-speed idling 2 ~ 5 minutes, observation run circumstance, fine correct before operation.

5. Homework personnel must be familiar with drilling machine function, don’t suffer from ChaoGuiDing range drilling.

6. Should according to aperture, loading and unloading drill bit when the choice, it must use the cone-shaped punch and card, don’t suffer from arbitrary drill wrench disorderly knock.

7. Should according to workpiece hardness and aperture adjustment drill feed quantity, hard material and large diameter drilling should choose small feed quantity, lest damage drill and workpiece.

8. Drilling, don’t wear gloves son, must not use hand to remove iron, not in the reverse of the bit rotation, provided the next tumbling measurement work or. Hand shall touch torsional parts.

9. Workpiece, prevent should pad pad drilling, drilling touch drillfloor.

10. Workpiece should put before drilling a steady, fixed. Master pieces drilling, should put safe; Small workpiece drilling applications linking piece or pliers fixation; Don’t suffer from hand directly drilling workpiece.

11. Workpiece, not suffering from after fixation with hammer or other things slams, lest damage drilling machine.

12. Drilling in operation, prohibits the use of rag.

13. Drill hardware or large hole, should add coolant, to prevent overheating damage drills, workpiece.

14. Drilling will thoroughly, should reduce pressure and axial feeding amount drill.

15. Operation. Find bits of the fixture, shall be immediately stop skidding mentioned, and drill from workpiece axis, clamping rear can continue to use.

16. Don’t suffer from.

(5) surface grinder safety operation procedures

1. Before driving must wear clothes, buttoned clothing, sleeve, long hair, long hair dish who must be within the department, don’t suffer from working cap scarf, wear gloves son operating the machine.

2. Before operation, should tools, fixtures and workpiece put them in order to remove any hinder equipment operation and operation activities of the debris.

3. Before operation, should transmission part safety shield raid whether complete, fixed, abnormal should real-time processing.

4. Raid before driving machine handles transmission part and whether fine and sensitive, according to add the feudals maintenance requirements on oil.

5. Before operation, should press workpiece, adjust good reversing grinding length stoppers position, and solid tight.

6. Install grinding wheel son must be static balance, again after correction, grinding wheel son should balance the diamond must sharp trim device, the cusp height should PingHangMian centerline of wheel son consistent, prohibits the use of ground blunt diamond dressing grinding wheel son, trim, must use cooling fluid.

7. Start grinding wheel son, should the hydraulic drive before adjusting the handle on & # 39; Low-speed & # 39; Location, grinding wheel son move fast handle on & # 39; Retreat & # 39; Position to avoid a collision.

8. Start grinder idling 3 ~ 5 minutes, observation, which should be paid attention to the workings of the grinding wheel son from workpiece 3 ~ 5mm; Confirm lubrication cooling system circulation, feudals correct running fine grinding homework again.

9. Raiding work-piece, unloading workpieces, processing machine failure will TuiLi workpiece wheel son after parking.

10. Not in the face, workpiece, electricity disk is placed on the processing items, banned in coal, electricity disk percussion, calibration workpiece.

11. Electromagnetic chuck and rectifier should be in five minutes after electrify after use, chuck adsorption, must raid on workpiece grinding, again after the strong adsorption higher or smaller workpiece, should add appropriate height on the board, prevent workpiece slanting pour, cause an accident.

12. Grinding wheel son, forbid to maneuver when nearly workpiece feeding, grinding wheel son not out, forbid to stop working when workpiece.

13. Grinding feeding should by small gradually big, not suffer from suddenly increase, to prevent grinding wheel son s